
Furnace Filter Replacement
FURNACE & HVAC FILTER REPLACEMENT IN NORTH LOUISIANA
The cheapest thing you can do for your HVAC system — and the most-skipped. We swap filters, match the right MERV rating, and keep airflow strong in North Louisiana's dust and pollen. Flat-rate, no surprises.
4.9 · 4,400+ reviews
Verified Google reviews
4.9★ on Google
4,400+ reviews
24/7 Emergency
60–90 min dispatch
Licensed & insured
LA Master Plumber #1874
North Louisiana
Ruston to Shreveport
Flat-rate pricing
Quoted before we start
Overview
The five-dollar part that protects a five-thousand-dollar system
A clogged filter is behind more HVAC breakdowns than almost anything else. When the filter chokes with dust, the blower strains, the system runs hot in summer and short-cycles in winter, and parts wear out years early. In North Louisiana — with our heavy pollen, long humid summers, and the dust that comes with them — filters load up faster than most homeowners expect. Mark Johnson & Sons keeps yours changed, matched, and doing its job.
The tech who shows up is on our payroll — no subcontractors — and pricing is flat-rate and simple. A skipped filter is the quiet cause behind frozen coils, burned-out blower motors, and dead capacitors, and it's the easiest failure in the whole system to prevent. Below is what we handle, how to pick a rating, and why the filter is the single best-value maintenance you can buy.
What we service
- Standard 1-inch filters — pleated and fiberglass, the sizes most furnaces and air handlers take
- High-MERV pleated media — MERV 8 to 11, more filtration for dust, pollen, and pet dander
- Whole-house media cabinets — thick 4-to-5-inch filters (Aprilaire, Honeywell, Trane) that change less often
- Media cabinet installs — adding a proper filter housing to a system that never had one
- Change schedules — sized to your home's pets, pollen, and dust load so you never run on a clogged filter
Getting the MERV rating right
Higher isn't automatically better. A filter that's too restrictive for your blower cuts airflow, which makes the furnace run hot and the AC coil freeze — the opposite of what you wanted. For a typical North Louisiana home, MERV 8 to 11 is the sweet spot: enough to catch dust, pollen, and dander, without starving the equipment. We match the rating to your specific furnace and blower so you get cleaner air and strong airflow both.
What Mark Johnson & Sons does differently
We seat the filter right, facing the correct airflow direction, and verify the system is breathing easy before we leave — a backwards or loose filter lets unfiltered air slip past and defeats the whole point. Add it to a tune-up or set up a coordination plan and you never think about it again. Our Classic Membership — $189/year — covers a Spring AC and Fall heating tune-up plus an annual plumbing check-up, so the filter gets handled at least twice a year, and members get 15% off repairs and priority scheduling.
Free quote
Set up your filter service
Tell us your system and how often you're changing it now. We'll match the right filter and rating and keep your airflow strong — flat-rate, no surprises.
4.9★
24/7
Emergency
Free
Quote
Current coupons
View allFREE
Filter change with any seasonal tune-up
Standard filter sizes. Must mention at booking.
Expires 12/31/2026
$50 OFF
Whole-home media cabinet install
New equipment only. One offer per household.
Expires 12/31/2026
15% OFF
Repairs for Classic Membership members
Membership required. Not combinable with other offers.
Expires 12/31/2026
Mention coupon when booking. One offer per household.
Warning signs
Signs Your Filter Needs Changing
When in doubt, pull it and look — if you can't see light through it, it's overdue. These are the tells.
The filter looks gray, matted, or clogged with dust and pet hair
Weak airflow from the vents even with the system running
Heating and cooling bills creeping up for no clear reason
More dust settling on furniture than usual
Allergies or stuffiness worse indoors, especially in pollen season
The system short-cycles or the blower runs louder than normal
Ice or frost on the AC line or coil in the middle of summer
A musty or dusty smell when the system kicks on
You honestly can't remember the last time it was changed

System protection
A clogged filter is the cheapest breakdown you'll ever cause.
Skip enough filter changes and the blower strains, the coil dirties, and parts wear out early. In our dusty, humid North Louisiana air, staying on top of the filter is the single easiest way to protect the system and your bill.
Typical change interval
1-3 mo
Across Ruston, Monroe, Shreveport, Bossier City, and North Louisiana.
The Process
How a Filter Service Goes

On the truck
Professional tools, parts, and diagnostics — every call.
Check the current filter
We pull what's in there, check the size and how loaded it is, and look at how it's affecting airflow and the equipment behind it.
Match the right MERV
We recommend a rating that cleans your air without choking the system — high enough to help allergies, low enough to keep airflow strong for your specific furnace and blower.
Install it correctly
New filter in, seated right, and facing the correct airflow direction — a backwards or loose filter lets unfiltered air slip right past and defeats the point.
Airflow verify
We confirm airflow is strong and the system is breathing easy, and check the blower and coil area for dust the old filter let through.
Set a change schedule
We tell you how often your filter really needs swapping for a North Louisiana home with pets, pollen, or a big dust load — and can coordinate the changes so you never forget.
Pricing
Filter Replacement Cost in North Louisiana
Flat-rate and low-cost — the best-value maintenance in the whole system. Filter type drives the price, and Classic Membership members get 15% off repairs.
Standard 1-inch filter replacement
Common pleated or fiberglass sizes
Standard
$25–$65
Member · save 15%
$21–$55
High-MERV pleated filter
MERV 8-11, better filtration for allergies and dust
Standard
$45–$120
Member · save 15%
$38–$102
Whole-house media cabinet filter (4-5 in)
Thick media, changed less often
Standard
$65–$150
Member · save 15%
$55–$128
Filter change added to a tune-up
Discounted when bundled with maintenance
Standard
$20–$90
Member · save 15%
$17–$77
Diagnostic with airflow / static check
Waived when you have us do the work
Standard
$89–$129
Member · save 15%
$76–$110
Media filter cabinet install
Adds a proper filter housing to the system
Standard
$350–$650
Member · save 15%
$298–$553
UV light add-on
Keeps the coil and media clean in humid air
Standard
$350–$700
Member · save 15%
$298–$595
Annual filter coordination plan
Right filters delivered and changed on schedule
Standard
$90–$200
Member · save 15%
$77–$170
After-hours / emergency dispatch
Added to the call outside normal hours
Standard
$175–$350
Member · save 15%
$149–$298
Member pricing reflects the Classic Membership 15% repair discount. Service call fees are separate.
Ranges reflect 2026 North Louisiana residential work. Filter cost varies by size, MERV rating, and brand. Specialty and commercial filters quoted separately.
Classic Membership
One plan. Whole-home peace of mind.
For $189 a year, members get 15% off every HVAC and plumbing repair, two complete HVAC tune-ups, a free plumbing and drain check-up, and priority scheduling on every call.
- 15% off repairs
- Priority scheduling
- 2 HVAC tune-ups/yr
- After-hours discounts
- $25 savings certificate
- Guaranteed flat-rate
Classic Membership
$189/year
One flat yearly price covers your whole home — everything listed, no per-visit fees, no surprises.
Questions? (318) 319-0220
Cancel anytime · 1-yr min
Compare
1-inch vs. 4-inch Media vs. Whole-Home Cabinet
Three ways to filter the same system. The right one depends on how often you want to change it, how much filtration you need, and whether your equipment can take the added resistance.
| Feature | Standard 1-inch | 4-inch pleated media | Whole-home cabinet |
|---|---|---|---|
| Filter cost each | $5 – $25 | $25 – $60 | $45 – $90 |
| Change interval | 1 to 3 months | 6 to 9 months | 6 to 12 months |
| Filtration (MERV) | MERV 6 – 11 | MERV 8 – 13 | MERV 11 – 16 |
| Airflow impact | Low, but clogs fast | Low — more surface area | Lowest per air volume |
| Install needed | None — drops in the slot | Fits deeper filter slots | $350 – $650 cabinet install |
| Best for | Budget, simple, frequent swaps | Most homes, allergies, pets | Serious allergies, low upkeep |
FAQ
Furnace Filter Replacement FAQs
For most homes here, every 1 to 3 months. Standard 1-inch filters are usually monthly, especially in pollen season or with pets; thick 4-5 inch media filters can go 6 to 12 months. Our humid, high-pollen climate loads filters faster than average, so when in doubt, check it monthly and swap it when it looks gray.
Related services
Related Heating Services
Filter service pairs naturally with these.

Furnace & Heating Maintenance
Complete seasonal tune-up — safety checks, cleaning, and inspection.

Furnace Repair
No-heat calls, short cycling, ignition and blower faults — fixed fast.

Ductwork Repair & Sealing
Leaky, crushed, or undersized ducts fixed and sealed for even airflow.
Available Around the Clock
Emergency?
We answer 24/7.
Burst pipe, water heater out, sewer backup? Real plumbers pick up — no answering machines. Mark Johnson & Sons Plumbing serves North Louisiana any time, day or night.
LA Master Plumbing #1874 · Backflow Cert #28131 · Master Natural Gas Fitter #LMNGF9062 · State Contractors #35794